I told you there would be HSTs in this mystery! Here is the 8-at-a-time method. Use this method to make 16 HSTs from your scraps or (2) 10″ squares. Square these up to 4-1/2″ unfinished.
Remember
A finished HST is the size that it is in a quilt. It’s dressed and ready to go to the ball. An unfinished HST is in raw, unclothed form. It will be 1/2″ larger than a finished HST because the size includes a 1/4″ seam allowance.
![Finished and Unfinished HST](https://scrapdash.com/wp-content/uploads/2025/01/finished-unfinished-HST-300x300.jpg)
The “Magic Eight” Method of Making
Half Square Triangle (HST) Blocks
This method works well when you need to make a lot of identically colored HST blocks. Here is an overview of the method. Make a test block first. (My personal preference is to cut the squares slightly too large so that I can square up the HST blocks later on. If you are sure of your 1/4″ seam, you can use
9-3/4″ blocks. ) Here is how to make a test block.
![8 HSTs](https://scrapdash.com/wp-content/uploads/2023/12/MM-Fleur-HST.jpg)
Assemble
- (1) 10″ × 10″ Background Square
- (1) 10″ × 10″ Scrap Square
On the back of the Background square, draw 4 lines: one vertically through the center; one horizontally through the center and one on both diagonals. These will be your cutting lines.
![Graphic showing square and lines for cutting and sewing HST quilt blocks](https://scrapdash.com/wp-content/uploads/2019/07/Magic-8.gif)
Place the Background square and the Scrap square right sides together. Sew 1/4″ on both sides of the diagonal lines. You will find it easier to chain-stitch these. Sew all the squares diagonally first, going from one block to the next without snipping the thread in between the blocks. When that is done, you can do the other side.
Press your sewn block. Don’t move the iron. Just press with a hot iron in an up and down motion. You want it to lay very flat before cutting.
![Graphic Showing Magic Eight Sewing Lines](https://scrapdash.com/wp-content/uploads/2019/07/Magic-Eight.gif)
Cut it apart on the drawn lines. If you cut it apart using a rotary cutter, take care not to move the squares with each cut.
When you have all the blocks cut, you will need to square them up. There are two ways you can square up your block. You can place a 4-1/2″ ruler so the diagonal line is directly over the seam and just cut two sides. Or you can press open the block, pressing to the dark, and square it up to 4-1/2″× 4-1/2″.
Ignore the sizes in the pictures below. They are just to illustrate the ruler.
![Making a Fussy Cut Sunflower Quilt Block](https://scrapdash.com/wp-content/uploads/2023/10/square-up-HST-768x780.jpg)
![Mardi-Gras-Magic-HST-Block](https://scrapdash.com/wp-content/uploads/2023/12/MM-HST2.jpg)
Download this free chart
I do have a PDF that goes along with this tip. You can find it here. It doesn’t have anything to do with the mystery, it’s just something for you to have and to hold if you like this method.
Next Clue, Next Hour
Don’t forget to send me your pictures! Anyone who sends me a picture of their fabric or blocks during or just after the mystery will receive a free copy of the final pattern as a thank-you. My email address is moc.liamg @sngisednoomebeohp.
Clues will become live at the times shown. All times are EST.
- 9AM Clue One: Cutting Instructions
- 10AM Clue Two: Surprise! Let’s Make Some HSTs
- 11AM Clue Three: More HSTs
- 12 NOON Clue Four: Oh, no!
- 1PM Clue Five: Beautiful Blocks
- 2PM Clue Six: Making Blocks
- 3PM Clue Seven: Making More Blocks
- 4PM Clue Eight: Making the Quilt Top
- 5PM Final Clue: Adding Borders
- Picture Page