Kitchen Stitchin’ – More Storm-at-Sea Block Tutorials

This quilt tutorial is part of the “Kitchen Stitchin” blog hop. The challenge is to make something that you would use in the kitchen, on the table, on an appliance, on the wall, or wherever else.

I gave myself a challenge in this blog hop: to continue the Storm-at-Sea quilt block tutorial that I started with the last month. (Part 1 is here.) That meant I could only use three blocks: the elongated triangle and the two different sizes of an economy block.

So I started playing with designs. I thought of this one:

But it’s a bit boring. So I put it together with other like blocks:

Better, but not really kitchen-y. How about this one for the Heart of the Home?

I thought about that one for a while, but then thought about an easier block, which also belongs in the kitchen:

If you look at that one sideways, it becomes a rocket ship, doesn’t it? That and the fact that my granddaughter is turning three at the end of May made me decide on this one:

It’s a placemat for a three-year old, or perhaps a table mat to put the cake stand on. Here is how to make it.

Requirements

Background (White)
Cut (2) 3-1/2″ wide strips by the WOF.  From those strips, cut (2) 3-1/2″ × 21-1/2″ rectangles.  Save the leftover strips for the Triangle-in-a-Square block.
Cut (4) strips 2″ wide by the WOF.  From those strips, cut (2) 2″ × 21-1/2″ rectangles, then cut (6) 2″ × 15-1/2″ rectangles.

Light Blue
Cut (1) strip 3-1/2″ wide by the WOF.  From that strip, cut (3) 3-1/2″ × 9-1/2″ rectangles.
Cut (1) strip 3-1/2″ wide by the WOF.  From that strip, cut (6) 3-1/2″ squares, cut on the diagonal to make (12) triangles. Save the leftover strip for the Triangle-in-a-Square block.

Medium Blue
Cut (1) strip 4″ wide by the WOF.  From that strip, cut (6) 4″ squares, cut on the diagonal to make (12) triangles

Dark Blue
Cut (1) strip 3-1/2″ wide by the WOF.  From that strip, cut (3) 3-1/2″ squares.

Yellow
Cut (1) strip 3-1/2″ wide by the WOF. 

• A Tri-Recs Ruler Tool.
• A Cute Cuts Ruler will be helpful but is not required.
• A rotating mat will be helpful but is not required.

How to make a Square-in-a-Square Block (traditional method)

Assemble:

• (3) 3-1/2″ Dark Blue squares
• (6) 3-1/2″ Light Blue squares, cut on the diagonal to make (12) triangles
• (6) 4″ Medium Blue Squares, cut on the diagonal to make (12) triangles

The sizes above are NOT exact – in fact, they are too large. You will have to square up this block twice. You will find that a rotating cutting mat is very helpful in this situation.

Sew a light blue triangle to opposite sides of the dark blue center square, taking care to match the center. Press to the triangle.

Sew a triangle to the other sides of the block and press to the triangle. Make (3) blocks.

Square these blocks up to 4-3/4″ x 4-3/4″. I prefer a ruler with a clearly marked 1/4″ so I don’t accidentally cut off the seam allowance.

Repeat this process with the medium blue triangles. Here’s a tip: when sewing through the edge of another block, try to aim for the X made by the two seams. If you sew through that X, you will not cut off your points.

Sew the other two medium blue triangles on the remaining sides and press to the triangle. Square up the final block. Make 3 blocks.

The flames in these candles will be made by sewing two triangle-in-a-square blocks together.

Assemble:

• (1) 3-1/2″ wide yellow strip by the WOF
• A leftover 3-1/2″ wide white strip
• A leftover 3-1/2″ wide light blue strip

Following the above directions, cut (6) yellow center triangles, (6) white side triangles, and (6) light blue side triangles. Since you are making an unfinished 3-1/2″ block, you will use the 3-1/2″ line on the ruler.

Make (6) blocks, 3 of each side color.

Don’t forget to square them up!

Now it’s time to put them all together.

Assemble:

• (3) Triangle-in-a-Square blocks with white corners
• (3) Triangle-in-a-Square blocks with light blue corners
• (3) Square in a Square Blocks
• (3) 3-1/2″ × 9-1/2″ light blue rectangles
• (6) 2″ × 15-1/2″ white rectangles

Sew a white corner Triangle-in-a-Square to a blue corner Triangle-in-a-Square.  Press to the blue. Make (3). 
 
Sew a 3-1/2″ × 9-1/2″ light blue rectangle to the blue side of the flame. Press to the blue rectangle. Make 3.

Sew a 2″ × 15-1/2″ white rectangle to both sides of all 3 candles.  Press to the white. 

Sew a Square-in-a-Square block to the bottom of the candle. Press to the Square.

Assemble:

• (2) 2″ × 21-1/2″ white rectangles
• (2) 3-1/2″ × 21-1/2″ white rectangles

Sew a 3-1/2″ × 21-1/2″ white rectangles between (2) candles.  Press to the rectangle.  Sew a  2″ × 21-1/2″ white rectangles to both sides of the three-candle block.  Press.

You are done! Finish your table topper and enjoy!

Please add moc.hsadparcsobfsctd-4de16c@sirk to your contacts list to make sure you get the confirmation message. Drag the confirmation message from the Promotion tab to the Primary tab if you use Gmail.

If you are already a subscriber, it’s okay to fill out this form. You won’t be put on the mailing list twice.

Don’t forget to sign up for the newsletter! Once a week, I send updates on quilt-related information I have found while wandering the web. This might be an inspiring article, a tip or tutorial I have discovered (or written), and occasionally exclusive offers & discounts as well as immediate access to the secret page of free patterns, guides, and printables. You can follow my page on Facebook, or join the Make Believe Quilters group, too.

---